1 / 8
43 and 50 cal paintball barrel plug sock — zdjęcie 1
1 / 8

43 and 50 cal paintball barrel plug sock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is a barrel plug that can be used for a 50cal and even a 43call marker. when you use a elastic cord of a length…

Ocena
0 / 5
Polubienia
6
Pobrania
81
Wydruki
0
Wyświetlenia
966
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

this is a barrel plug that can be used for a 50cal and even a 43call marker. when you use a elastic cord of a length of 40cm. than it will work for both the Umarex T4E PPQ and HDR 50. but it can be used for different type of markers as well.

I made this to provide a way to make these markers a bit saver when you are out of the game area. like we are used to with other markers.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Supports:

Yes

Resolution:

0.2mm

Infill:

40%

Filament: Jupiter PETG

Notes:

shell: Wall line count: 4

the supports are only needed for the hole where the cord goes through.
so it it really needed? I think not but I did it any ways

Post-Printing

Elastic cord notes

Elastic cord notes

The elastic cord should be 40cm long and the thickness 3 or 4mm.
when you like it to use it for a PPQ or HDR marker

Category: Sport & Outdoors

Tagi