1 / 2
Meshtastci rear case to fit bigger makerfocus battery
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
accommodates larger battery maker focus no supports
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 424
- Wydruki
- 2
- Wyświetlenia
- 1999
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (50)Powiązane
Didn't like the standard battery that the original poster made as it needed supports and looked horrible when printed.
This is about 3mm bigger on the outside and has more room on the inside for the larger makerfocus battery and most importantly doesn't need supports like the other one which printed out really bad on the underside.
DO not over tighten the screw
