1 / 2
Storage box for Siser blade housing and blades - Gridfinity edition — zdjęcie 1
1 / 2

Storage box for Siser blade housing and blades - Gridfinity edition

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple model for keeping your Siser blade housings and blades tidy.

Ocena
0 / 5
Polubienia
5
Pobrania
64
Wydruki
0
Wyświetlenia
326
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a rework of my previous Siser blade storage model. It features 2 vertical blade housing holders and a lidded space for 6 blades and covers and also a section for old blades.

The housing holders have a recess at the bottom to prevent contact with exposed blades.

This is a Gridfinity 1 x 2x 1 block with magnet and screw holes.

I used generic PLA at 2.8 layer height with Arachne wall generation.

The wider draft layers also serve to keep the lid secure.

Tagi