1 / 4
Super Dust Deputy 4/5 Cyclone - 6" to 5" reducer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mimics the 6" to 4" reducer that ships with the Super Dust Deputy, but is instead 5"
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 692
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (20)Powiązane
This is designed to fit the inflow port on the Harbor Freight 2HP dust collector blower with very little wiggle room - it needed to be tapped in. This dimension is 124.8mm or 4.91in. I've included a version which includes a mounting hole for the attachment screw.
If you need a slightly different measurement for the reduced dimension, leave a message and I'll put it up.
