Trinity Ender Conversion Two-Color Embedded Logo Bed Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick remix to embed the logo into the tray. Requires 350x350 print bed.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the bed panel and added the trinity logo into it to be printed in dual color. Load the str into your slicer, align how you want it, then split into objects and assign the two filaments to each object. For me, I used orca, and I did a manual filament swap in between colors. Note: The logo is 1MM deep, and I needed that because I was using light colors and I wanted to avoid bleeding. As a result, you might need to adjust your layer height accordingly. I did:
- First Layer: 0.4
- Other Layers 0.3
This allowed minimal filament swaps. If you want to adjust the depths, I have included the step file so you can customize to your liking!