1 / 3
Story stick version of yardstick trammel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the holders to specifically accommodate points for comparing distances.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The modified pivot piece can be printed without supports and attached to the cone with a short piece of 1/8" dowel.
I used PLA, but any filament should work.
As in the original, you can use a ruler that is the proper thickness or, a strip of material that is about ¼" thick.