1 / 2
Axial SCX10 center mount for CNC Aluminium 2:1 Transfer Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A transfer case mount
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Imported from my designs on Thingiverse. Original upload was 18.07.2019 (dd.mm.yyyy)
I do most mechanical design. Can do easy basic patching.
Mount/bracket for your "CNC Black Aluminium Transfer Case" with mostly 2:1 gear ratio.
It has the same measurements that the original geabox mount from Axial.
Print it vertical like the file for best result.
0.15, 30% infill, 3-4 perimeters, maybe use tree support.