1 / 1
IKEA Skådis Greenworks Gen2 40V Battery Charger Mount V2 — zdjęcie 1

IKEA Skådis Greenworks Gen2 40V Battery Charger Mount V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

V1 + Improved posts and foot fitment

Ocena
0 / 5
Polubienia
6
Pobrania
50
Wydruki
0
Wyświetlenia
626
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Greenworks Gen2 40V Battery Charger Mount V2 for IKEA SKÅDIS System


This is an improved Greenworks Gen2 40V charger mount for their line of yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178. (See their collection of T-Nut mounted parts below.)

The result is a part that holds the charger firmly on the board. I've designed the part to be able to lie flat on the print bed without any supports (really) for a quick clean print.

V2 Info: It turns out that when charging some of the heavier batteries, the posts that the charger slides onto just aren't strong enough. So I've added a screw that holds the posts onto the body. I've also charged the shape of the body where the rubber feet of the charger meet for easier installation. 

BOM:

- 1 x SKÅDIS Greenworks Gen2 40V Battery Charger Mount V2 Body (this printed part)
- 2 x SKÅDIS Greenworks Gen2 40V Battery Charger Mount V2 Posts (this printed part)
- 4 x SKÅDIS Alignment Plugs (this printed part)
- 4 x printed SKÅDIS T-Nuts (from 6d6178)
- 6 x M2.5 hex nuts (to drop into the printed T-nuts listed above)
- 6 x M2.5 screws

Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts.

Have a Gen1 charger? Click here!