Raspberry PI4 wall mount | Open design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry "open" wall mount
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 467
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am using many PIs around the house, couple dedicated to pihole and stuff around the network.
This one is next to my table so I can see potential issues without logging in.
Feel free to modify the PI “holder".
I have a plan to create a version that allows to mount 40mm Noctua fan + allow to use POE shield with screen ("WIP")
Please print the “Fit_Test” files to double-check the print.
It should work without any force but it must hold in place!
The “full” print will require a bit of force at the end (I have used hammer to tune the last few mm`s)
PLA
0.20mm (Default prusaSlicer quality)
Use https://www.amazon.com/Raspberry-Standoff-Standoffs-Building-Quadcopter/dp/B0788FR59P (example) to attach pi to the mount