Stacking Owls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun recreation of some stacking owls
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 61
- Wydruki
- 2
- Wyświetlenia
- 274
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
*Nothing like a day one patch! After intermixing an older iteration with my latest version, I realized the foot design of the older model worked even better (with the new ears) than what I had published. So, the ‘v2’ versions have this updated foot, which allows for higher stacking angle when attaching the ears to the feet. This may provide more stability in some instances.
Pictured are the half sized owls. These little stacking owls are easy to print, even in multi-color on a single extruder printer. They stack in various ways allowing you to create small or large balancing towers.
Tips and notes:
- I've found that regular PLA or Silk PLA is almost too smooth with creations that are wide. It would appear the lack of friction creates some instability. They still work, but you may be limited in how large you can build.
- Matte PLA will give you a slightly better grip.
- To increase ‘stickiness even more, use the ’fuzzy skin' setting in your slicer. In PrucaSlicer I've found a ‘fuzzy skin thickness’ of 0.1 and a ‘fuzzy skin point distance’ of 0.1 to work well and not detract from the pieces themselves.
- For an even better stick, use Woodfill PLA. The grippiness is so much better and I've had the best luck with building large creations.