Charging cable bed clamp // Ladekabel-Bettklemme - Different Sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clamp for a bed frame, designed for a USB-C cable to finally never again fall into what is the void underneath my bed
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 545
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
The idea came from the problem i had where the charging cable i would often use to charge my phone when lying in bed would always fall down whenever i didn't need it and had unplugged it from my phone. Now it can finally rest here, beeing save from the monsters dwelling underneath (aka the dust , that has been accumulating here ever since i moved in, but i digress).
To adjust this little live saver for your own bedframe, i can offer you the Inventor 2025 .ipt file, I hope it works with Fusion 360 too. The parameter “Clamp_width” infact does describe the clamp width. In case that doesnt work, i have put the model with 10mm to 30mm (in 2mm steps) clamp widths into the downloads :)
Also a mirrored one, in case you sleep on the wrong side of the bed ;)