iPhone 6 13 monitor mount (Reincubate Camo webcam)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put your phone on top of the monitor for use as a webcam
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 902
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
If you use Reincubate Camo (or other software) to use your phone as a webcam and if you use an iPhone 6 or 13 Pro or something sized close enough, then this design might be the webcam mount you need. If it isn't then you might need to design the part that holds your phone, it is attached to the monitor claw/pivot by two M3 bolts. The monitor claw should hold on to just about any monitor and the pivoting vertical adjustment means you can compensate for the angle.
As Prusa does for the MK3S printed parts, insert M3 nuts into the slots provided to fasten pieces together. The monitor claw and mount back fit together and the nut and bolt go through the central hole. If you have a metric tap and die set it can help the nut and bolt if you tidy up the printed thread with them.
When finished the iPhone lens should just be visible over the top of the monitor.