1 / 3
Commodore 1702 monitor speaker adaptor — zdjęcie 1
1 / 3

Commodore 1702 monitor speaker adaptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adaptor bracket to allow you to mount a smaller speaker in a Commodore 1702 monitor, the default is a 4"…

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
271
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an adaptor bracket to allow you to mount a smaller speaker in a Commodore 1702 monitor, the default is a 4" square speaker (I only had a 3" on hand), I also included my SCAD file so you can adjust it for the specifics of your speaker if needed.

This was tested on an NTSC Commodore 1702 monitor (it may work fine for others as I suspect the cases were the same, e.g. PAL, etc) .. Possibly would work for 1701 monitors as well. (untested)

Print Settings

Printer:

Craftbot

Rafts:

No

Supports:

No

Resolution:

0.3

Infill:

50


Notes:

You can pretty much use whatever material/settings you want.

Category: Replacement Parts

Tagi