Poker Chips Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of unique poker chips if you wanted to do something different
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 971
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a fully 3d printable poker chip set. The holder is capable of holding 200 chips. I recommend printing the chips with as much infill as possible as they will have a much nicer weight, but any infill will do. Please note that if your filaments are tuned differently some may end up thicker than others, which can be seen in the last image with the green chips. I have added some indents into the lid to amend this.
Each slot holds 20 poker chips
Poker Chip Settings:
no specific filament needed.
0.2mm layer height
Some kind of circular top/bottom surface pattern recommended as it looks nicer (concentric or Archimedean)
any infill, 100% recommended
Poker Chip Holder Settings:
0.2mm layer height, no supports