1 / 3
University of Nebraska coaster — zdjęcie 1
1 / 3

University of Nebraska coaster

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,50 € – 0,61 € netto (bez VAT)

Dla pliku: nebraska-coaster.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,55 € netto (środek widełek).

Masa podana przez autora
9 g
Czas druku podany przez autora
27 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

🌽 Huskers fans and U of Nebraska alumni, here's a super easy print that looks great on your table. 🟥⬜

Ocena
5 / 5
Polubienia
6
Pobrania
123
Wydruki
1
Wyświetlenia
359
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

🌽 GO BIG RED! 🟥⬜

Huskers fans and University of Nebraska alumni from Lincoln or Kearney, here's a super easy print that looks great on your table.

You can print this as red on white, or the opposite.

No special settings, it's a pretty straight forward print. Pause to switch filament color, or use MMU/AMS.

I used a Hilbert curve top infill to have a cool pattern beyond the boring monotonic lines.

 

Note: This is a personal project, I was not endorsed or paid by the University and did not mean to infringe any rights.

Tagi