1 / 1
Frame Arduino Mount for SpaceMouse V2 with Joystick Fitting Issue Fix and Heat Inserts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place the arduino in the frame instead of using zip ties.
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (17)Powiązane
Add a heatset to the hole next to the mounting hole, slide the arduino in, then screw the clamp into it with a M3x6 or M3x4 screw. Also requires 4 heatsets on the bottom of the frame.