1 / 7
RC FVP antenna mount at 90 degree angle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This antenna mount can be used on drones. It also functions as a battery brace so that the battery does not slide…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This antenna mount can be used on drones. It also functions as a battery brace so that the battery does not slide backwards during flight.
Print it at !00% infiltrated so that you can dril mounting holes according to your drone frame layout.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
100%
Notes:
Infill must be 100% if you want to drill mounting holes. otherwise 27% is fine.
Do not use PLA that is to brittle. I would recommend PETG or nGen.
Category: R/C Vehicles