Toy Fire Strobe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic representation of a ceiling-mounted fire strobe. I printed this as a toy for my son who is really into fire…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Basic representation of a ceiling-mounted fire strobe. I printed this as a toy for my son who is really into fire alarms and fire safety equipment, but I sized it accurately enough that it could even be used to mock up where a strobe could be mounted. It's not necessarily based off of any particular model, but it's 173mm wide, which seems to be a somewhat standard size.
This version doesn't have any mounting holes-- I recommend using some form of double-stick tape or 3M Command strips to mount it. I may make a revision of this with mounting holes for nails or screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
.2
Infill:
5%
Filament:
IID MAX PLA+ Red/White
Notes:
Sliced with PrusaSlicer, printed on a heavily modded Ender 3 with ABL and a Titan Aero hotend with a 0.4mm nozzle. Printed with 4 bottom layers and 5 top layers.
Model is designed so that you can cleanly swap to a different color filament for the "FIRE" lettering and the dome.Category: Toys & Games