Ketchup & mustard bottle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottle holder for your ketchup, mustard, burger dressing, remoulade, etc.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 323
- Wydruki
- 0
- Wyświetlenia
- 1457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Upside down bottle holder for your ketchup, mustard, burger dressing, remoulade, etc.
To be used in the refrigerator and/or at the dining table when barbecuing.
The holder only adds 0-2mm to the height of the bottle (depending on brand) - so it should fit fine in the same spot as you currently store your bottles in the refrigerator.
Designed for 400-425g bottles from Bähncke & First Price and 800-900g bottles from Graasten, but will of course fit other brands with similar bottles.
Four different designs in two sizes. Please be aware that the small 400-425g model also will fit fine for 800-900g bottles, but they will of course not be as stable as the large model due to smaller surface area.
Printing instructions:
- 0.2mm layer height
- No support needed
- Optional: For seams position, select either “Aligned” or “Back” depending on model (eg. the Bricks-design will look better with aligned seams, while the others probably will look best with the “Back”-seams setting, to get the seams in a straight line)