Typhur Sync Meat Thermometor Protective Case / Storage Box (Multi Color)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective Case for the Typhur Sync meat thermometer with a magnetic lid.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Easy to print protective case for the typhur Sync Meath thermomentor.
For a more secure hold I inserted magnets during the print.
For the lid I used three 5x2 mm round magnets and for the lower case I used a pilll shaped magnet with 6mm diameter.
The bottom part has 16x5x6 mm space for a magnet.
The case also has a hole on the side to charge the typhur sync while stored away in the case.
I printed the case in Prusament PETG Jet Black and Signal White with the 0.25mm profile.
It should also be possible to print it in one color and then have the white parts from the top cover as an embossed element. To print the seperately will probably not work because of the very thin lines.