OMTech Polar Front Vent Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front vent cover for the OMTech Polar
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a front vent cover for the OMTech Polar. It helps to keep the “burning smell” down when you're not using the machine by slowing any backdraft that might push air from the machine into the room. It's not a complete solution because there are small openings around the bottom of the machine as well as cracks around the top glass, but it seems to help especially if you have the machine in an office environment. Obviously only have these installed when the machine is not in use!
You print two of them and install them symmetrically. I printed in TPU with 40% infill and .24 layer height and it works great, but you might need to adjust tolerances if it's too tight/loose.