cellphone holder for C7 Corvette
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design for a cellphone holder for a C7 Corvette. It mounts to the hand grip on the center console.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a design for a cellphone holder for a C7 Corvette. It mounts to the hand grip on the center console. It clips into the seam between the trim and the leather on the top and bottom of the hand hold.
It uses some parts (modified) from www.thingiverse.com/thing:1881485 and www.thingiverse.com/thing:3514886.
Also included a version with the holder and socket combined to eliminate the need for gluing.
Print instructions
Use ABS or PETG for use inside a car. Will require supports to print successfully.
If you use the separate files for the main body and the socket, glue the socket to the back of the main body (if you use ABS, you can acetone weld it.
I recommend using something like Plastidip or similar to add a little "stick" to the holder so that the phone won't slide out.
UPDATE: I created a mount to be able to use a MAGSAFE holder made by ESR (https://www.amazon.com/dp/B0B38P9TF8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1). It should work with both the magnetic holder as well as the version with the QI charger. The new mount WILL NOT WORK with the included holder and socket. It is fairly specific to the ESR holder.