Travel Spice Container (Doesn't Leak!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple travel spice shaker for taking your favorite seasoning while traveling!
- Ocena
- 4 / 5
- Polubienia
- 26
- Pobrania
- 216
- Wydruki
- 1
- Wyświetlenia
- 766
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple travel spice container for your favorite spices while traveling!
This three piece design has close tolerances to keep your spices traveling with you but not leaking in your bag. The inner lid has 13 holes for easy application to your food and screws into the main body. It is designed to be the same height as the body when inserted, so the lid seals the container and spices perfectly!
Printing:
- Layer Height: 0.12mm
- Wall Thickness: 2mm
- Top/Bottom Thickness: 2mm
- Top/Bottom Pattern: Concentric
- Infill: 40% Gyroid
- Supports: None
I printed using PolyMaker PolyLite PLA Pro on an Elegoo Neptune 4, but it should print great on any printer with good tolerances.
I used 0.12 mm layer height with 2mm walls and top and bottom layer thickness. I typically print with 40% gyroid infill. A suggestion is to do concentric top and bottom layers to have the best finish! No supports are needed if the files are printed as placed in the STL's.
Once printed, put your spice into the container and grab some needle nose pliers or a fork to screw the inner lid on. This is a tight fit so that no matter how fine your spice is, it will not leak out!