1 / 3
Gaggia Classic Pro Low-Profile Drip Tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low-profile drip tray with purge piping.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 1072
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A low-profile drip tray for the GCP:
- Gives room for an actual mug
- With some minor soldering, the design pipes steam wand purging straight to the drip tray.
I think my print is PLA but it would probably be better in PETG. I didn't print mine with any supports but it wouldn't use a lot of material if you wanted them. I used CA on both sides of the copper piping to seal up the connection and it hasn't ever leaked. Lastly, when I empty the tray out I always add a small bit of fresh water so that when the superheated water enters the tray it doesn't warp the plastic - no issues with this method.