1 / 11
Dowel, nuts and bolts for Minifig TP Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is all the nuts, bolts and dowels (Sleeves) required for the Minifig TP Holder found here:…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
This is all the nuts, bolts and dowels (Sleeves) required for the Minifig TP Holder found here:
http://www.thingiverse.com/thing:1277045
Edit: 12 June 2017
Experience has taught me the following:
- Use the 140 mm long sleeve I have just uploaded. 145 mm is slightly too long. Print this at 1.01 times the size of the .STL here
- Use the 45 mm long bolts and size/print them at 0.99 times the size of the .STL files here
If at all possible, use PETG or ABS for the 45 mm bolts as thy need more strength than PLA prints
I leave all the other files here in case anyone wants to use them instead.Enjoy.
All created as customised versions of Nut Job
Print instructions
Category: Bathroom Print Settings
Printer: Velleman K8200
Rafts: No
Supports: No