Space Shuttle Model Rocket (based on Estes Baby Bertha)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model rocket based on the space shuttle. It doesn't fly very well but its looks justify its existence. It is…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a model rocket based on the space shuttle. It doesn't fly very well but its looks justify its existence. It is composed of 3D printed pieces, an Estes Baby Bertha model rocket, and laser cut balsa (this could be carefully cut out by hand).
Print Settings
Printer Brand:
Dremel Digilab
Printer:
3D40
Supports:
Yes
Resolution:
.2 mm
Filament: Dremel PLA
White
Notes:
The nose cone will need to be sanded to fit the body tube of the rocket. The PNG image is what was used to laser cut the balsa. The landing gear especially will need support material.
Post-Printing
Printing is only half the battle
Spray paint, glue, sandpaper, and a little TLC are required. Custom decals are optional.
(Originally published on Thingiverse March 09, 2019)