Ender 3 S1 Logitech C270 16mm drop mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the migsun mount found here:https://www.thingiverse.com/thing:5858481 I needed a lower view to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the migsun mount found here: https://www.thingiverse.com/thing:5858481
I needed a lower view to properly see the nozzle during printing since my cooling duct was in the way. This drops the camera ~16mm from centerline. This also provides an access point through the mount to install the screw and rod.
I may update this to include a cable retainer/manager
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12
Infill:
30%
Filament: Inland PLA+
Black
Notes:
I print overkill so while these settings work, they are not optimized for speed. I believe PLA+ will be ok, but one may consider using PETG or other stronger material
Service hole for re-installing the screw retainer
View point from Octoprint
Category: 3D Printer Parts