Jedi: Fallen Order Customizable Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Premium parts are here. I will be scaling this set to 90% soon as a result as I've found it to just be too large. You…
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- People
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Premium parts are here. I will be scaling this set to 90% soon as a result as I've found it to just be too large. You can still fit these, just need to scale the parts here down to 90% in the slicer first: https://www.etsy.com/listing/767354813/3d-printable-jedi-fallen-order-inspired
Future game-inspired pieces will always be freely available.
Update 4: Power and Control II handle + switch, Cere Junda emitter, and a stand (print 2)
Update 3: Added new parts
Update 2.5: Fixed JT Switch some
Update 2: Added Eno Cordova Emitter
Update: Added broken handle piece that I forgot to upload.
Starter lightsaber from the game. Each section screws on / apart so its customizable you just need to add the male / female threads.
Done in Blender 2.81 and Substance Painter for the grip.
Printed in Copper Silk PLA and Prusament Galaxy Black PLA
Print pieces vertically with brim
.blend file for modifying available on MMF https://www.myminifactory.com/object/3d-print-106850
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Yes
Supports:
Yes
0.2mm
Infill:
33%
Filament:
Prusament PLA
Notes:
0.2mm layer height is good enough for functional threading
Parts that need support:
- JT Emitter (bottoms of shields only if printed vertically)
- Eno Cordova Emitter
In general, you should block support on the threads as its a pain to remove.
Recommend printing vertically, WITH BRIM
Category: Scans & Replicas