De'Longhi Scoop (5332169200)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
De'Longhi Scoop (5332169200)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In the past I was struggling to find this scoop by De'Longhi so after all I decided to make one for my self so I can do a holder.
You can find holder for this scoop here: https://www.printables.com/cs/model/883098-delonghi-scoop-wall-holder-5313275051
I printed with 0.25N and 0.20L with supports for the handle so I get smooth inside of a cup.
You will need supports for this model. It is up to you how you orient this model. You will either have to use supports for the “cup” it self or the handle.
EDIT: I posted two new models. The only difference is position of a slot. I would recommend you to select such model based on how you plan on supports.
I also added model with slots on both top and bottom side but I only tested print with supports on side that has no slot.