Coffee filter stand for 1x4 filters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coffee filter stand designed to hold 1x4 filters. Easy to print and assemble.
- Ocena
- 0 / 5
- Polubienia
- 74
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Coffee filter stand for size 1x4 coffee filters.
It is possible to print all the parts without supports. I recommend printing the parts with PLA filament with supports for the best possible fit. All parts should attach easily with minimal effort.
Parts in the STL files have not been oriented. When importing them to a slicer program the parts should be oriented flat on their side.

Assembling instructions
1. Take note of markers found in Left Side, Right Side and Back parts
There are matching circular markers found in the parts to distinguish which part attaches to the left side and right side of the stand.
2. Slide Left Side and Right Side parts to the Back part

3. Slide the front parts into place

Front parts are identical.
4. Attach Back part with Bottom part

These parts should snap into place. Make sure to have the correct orientation with the Bottom part, they will not come apart easily afterwards.