Strong Flying Propeller / Pull Copter (No Supports) - modified gear wheel & pulling rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
modified version of Meister Edel's "Strong Flying Propeller/Pull Copter" with smaller gear wheel and adapted pulling rod
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 577
- Wydruki
- 8
- Wyświetlenia
- 2849
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is a modification of Meister Edel design “strong flying propeller / pullcopter (No Suppoerts)” which sets off already quite fast and the flying propeller goes really high. Thank you for your nice design!
But … I asked myself what to do that it will spin faster and fly higher ;-)
If you have already printed the “old” design, you can exchange the smaller gear wheel and use the new pulling rod. In this case, you may want to print the modified parts use “strong-flying-propeller-pull-copter-modified_gear&pulling_rod.3mf”.
When you want to print the complete set without propeller print “strong-flying-propeller-pull-copter-modified_set_no_propeller.3mf