Prusa XL Mod - Nozzle Seal Spring Blunted End
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print to blunt the end of the nozzle seal spring steel to prevent damage to the silicon seal.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 44
- Wydruki
- 4
- Wyświetlenia
- 758
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Some of the Nozzle Seals on my Prusa XL had broken and i was thinking that it could be the spring steel was too sharp and was cutting the silicon seal.
This model blunts the end of the spring steel to maybe stop the silicon seals from breaking/getting cut..
I have just installed, had to work them a bit to get them on, but fit well. They have not had any long term tests as of yet.
Printed at 0.15mm layer height in PLA+. TPU would probably work well, but I haven't tested.
Print vertically, no supports. I didn't need a brim, but they have very little contact area with the bed, so it could be needed.