C Battery Holder / Storage Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple vase mode storage for C Batteries
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 151
- Wydruki
- 2
- Wyświetlenia
- 407
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the brilliant used of vase mode on his AA and AAA battery storage trays, here , I made a set for D bateries, and another for C batteries. These use the same vase mode technique to print very quickly while using very little filament. For C Batteries, I provided 2 files, one for 18 batteries and one for 24 batteries.
Print in vase mode, with 4 bottom layers for best results. I used PLA for my prints, but any filament should work just as well.
Since these are in Vase Mode, be careful when lifting them while full of batteries. C and D batteries are pretty hefty, and it would be possible to snap the tray. If you do need to lift the tray regularly, print in non-vase mode. It'll take longer and use more filament, but it will also be a LOT stronger.