Eibos Polyphemus Riser Stand for Filament Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser for the Eibos Polyphemus which adds about 50mm in height.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 637
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
50mm riser Stand for the Eibos Polyphemus.
I build it to bring the Eibos Polyphemus to one level with my printer, optimize the filament path and provide better airflow for the dryer (I never had an airflow issue :-) )
I printed the riser stands with Prusament PETG Prusa Orange/Jet Black and the 0.2 Speed profile. Supports are not needed if you print it upside down.
I printed the screws seperately. The screws fit into the screwholes of the dryer on the bottom and fix it on the riser stands so that they can not move. You need 4 screws in total.
The Holders on the side are completely optional. They give me the opportunity to fixate the whole assembly in position by sliding the holders under my granite plate where the printer stands.