C-Bar for Paragliding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simply clever bars for better steering with C risers on the paraglider.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 314
- Wydruki
- 2
- Wyświetlenia
- 1780
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Story
My friend, who is a paragliding pilot too, wanted to make a simple C-Bars for better steering by C risers of his paraglider.
There are some designs on the internet, but instead of verification other designs if they fits, it is easier design by myself.
Description
This C-Bar is for C riser with dimensions (12 x 2) mm, which are common for higher class of UP Paragliders brand (it also works with my KIBO 2).
Print settings
- Material: PETG (ASA or PLA should work too)
- Layer height: 0,15 mm (QUALITY profile in PrusaSlicer)
- Perimeters: 3
- Infill pattern: Gyroid
- Infill density: 20%
- Supports: Optional - if so, then supports on build plate only
Bill of Material (BoM):
- 4 pcs of 3D printed half bar
- 8 pcs of M3x16 Screws
- 8 pcs of M3 Nuts
Simply clever design tip
I way too lazy to design different opening for Screw and Nuts, so I had simply clever idea make it universal and it works pretty well!
Disclamer
I am not responsible for any damage or injury on your paraglider using this custom C-Bar. Just use common sense and do not be stupid. Happy Printing and Fly safe!
Source data
.STEP file included for easier remix, just respect the licence and give me a credits. Thanks!