1 / 3
The Caulk Hero for When You Need to Save Some Caulking — zdjęcie 1
1 / 3

The Caulk Hero for When You Need to Save Some Caulking

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lid for the top of a standard tube of caulking. The outer diameter helps you to force on better.

Ocena
0 / 5
Polubienia
18
Pobrania
207
Wydruki
0
Wyświetlenia
751
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

So you bought a $20 tube of caulking and you're not even going to use 25% of the tube. You've tried a bunch of methods before--using a screw or nail to plug the hole, a smaller cap, cutting the finger off a latex glove and taping it on--but nothing is reliable. 

This is it, this is your Caulk Hero!

This thing has worked for me. The model is based off of some that are available in the big box stores that have worked for me. The problem is I need like 5 of them, so presto a 3D model for printing. I hope you find this to be your caulk saver too.

I printed mine in PLA+ with 50% infill (the infill only got applied to the very top of the lid when I sliced it).

Suggestions for improvement welcome. Happy DIYing!

 

Tagi