1 / 18
RV Extended Grab Handle Main Entrance TPU Door Bumper — zdjęcie 1
1 / 18

RV Extended Grab Handle Main Entrance TPU Door Bumper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU Bumper that keeps your extended door handle from destroying your new $100 dollar fancy main entrance lock.

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
191
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Public Domain

I have a Grand Design Transcend Xplor 240 ML and installed an Onnais Electronic Main Entrance Lock. When I place the extended grab handle in the travel or closed position it was touching the #3 on the keypad. I made this bumper block to add about 7mm of space and cushion so it would not destroy the lock during transportation. Easily prints with TPU. You can Print in place but I recommend using the separate models and printing in separate sessions. This will limit stringing and having to lightly separate the parts for the first time. Simply snap the larger block on first the slide the small block into the larger blocks grooves. Now a little alignment and no mor worries!!!
 

Tagi