Corsair 5000D Airflow Headphones/Headset Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphones/headset hook made to fit the Corsair 5000D Airflow case.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 185
- Wydruki
- 2
- Wyświetlenia
- 1048
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Allows headphones or a headset to be mounted anywhere on either top side of the Corsair 5000D Airflow case. No mounting hardware required - kept in place by the removable top vent cover. Just pop up one side of the vent cover to put in the hook and push it back in again. The hook can then be moved along the side to position where desired.
There is 3cm of hook space for the headphones band. Holding a Sony WH-1000XM4 pictured and also confirmed working with Sony WH-1000XM5. Models with different dimensions can be provided on request.
The model can be printed with or without top and bottom layers. Pictured hook was printed with 3 perimeters (0.4mm nozzle), 0 top and bottom layers, and 15% honeycomb infill. PLA is probably sufficient, but PETG or greater could be used for better heat and UV resistance (especially if it's going to be in direct sunlight).