Audi versatile screen holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a generic screen holder for children, that adapts to the front seat of my Audi Q7
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
These are versatile holders, adapted to my car (Audi Q7), which has square headrest bars and not the usual small round ones (see pictures)
Per seat, you'll need:
- 1 back (facing the back seats)
- 1 front (facing the front seats)
- 1 holder
- 2 M6x35 flat head hex bolt (something like this)
- 2 M6 nut
There are currently the following holders:
- RAM : adapts to RAM mount system, by providing a 1in sphere. Can be used with any RAM like adapter
- ipad : works well with my 11in iPad pro
Planned, but not done yet are:
- quadlock adapter
- go pro mount
I've printed everything out of PETG, limited post-processing (just use a 6mm drill on the holes and removed support). When printing, I tend to emphasize on sturdy and reliable, not fast print, so you can probably shave a fair amount of time by using different tradeoffs
notes:
- all_print contains my base profilewith everything on the build plate (will give you orientation and such, just hide whatever you don't need before slicing)
- this is a “from scratch” design in Fusion360, I can happily share link to model