1 / 2
Night Vision Camera w/ Raspi Zero — zdjęcie 1
1 / 2

Night Vision Camera w/ Raspi Zero

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A case that accomodates a night vision camera such as the ones sold by electreeks.de and a Raspberry Pi Zero (2) W.

Ocena
0 / 5
Polubienia
6
Pobrania
55
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a case to hold a night vision camera like those sold by www.electreeks.de, the one linked to below specifically together with a Raspberry Pi Zero 2 W. It comes with a tripod mounting point. As the camera does not have any mounting holes, I designed a clamp to hold it in place. That's the little bar like part ;) 

Obviously for indoor use only …

Hardware required:

  • 4x M3x15 countersunk heads for the case
  • 4x M2,5x5 NOT countersunk to hold the Raspi. 
  • 1x ¼ inch by 20mm threaded insert for tripod mount. 

Printer used: Original Prusa MK3S+

Filament: PLA or whatever you like

Printing instruction:

Layer height: 0.2mm
Supports: yes, supports on printbed required

Fusion360 File provided as-is, have fun!

 

Camera: 

https://electreeks.de/shop/raspberry-pi-kamera-nachtsicht-mit-infrarot-sperrfilter-175-grad-weitwinkel-objektiv/

Tagi