Doppelzahnrad 104-127 für Bernardo P600G, Double gear for Bernardo P600G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Doppelzahnrad für zöllige Gewindesteigungen 13 und 26 GG/Zoll. Double gear for imperial threads with 13 and 26 tpi.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Doppel-Zahnrad mit 104-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen.
Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die Steigungen 13 und 26 Gänge pro Zoll möglich. Hebelstellungen siehe Tabelle.
26 Gänge hat das C.E.I Cycle Engineer Institution Thread bzw. BSC British Cycle Thread Gewinde das man an Motorrädern oder Fahrrädern findet.
Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.
Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig
Achtung: Für einen paßgenauen Sitz muß die 14mm Bohrung mit einer 14 H7 Reibahle auf genaues Maß gebracht werden!!
Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch wirklich an den anderen genannten Drehmaschinen paßt.
………………………………..
Double gear with 104-127 teeth for driving the feed gear on the Bernardo P600G lathe for cutting inch thread pitches.
With this double gear instead of the original 120-127, pitches of 13 and 26 tpi are possible. See table for lever positions.
The C.E.I Cycle Engineer Institution Thread or BSC British Cycle Thread that you find on motorcycles or bicycles has 26 gears.
Should also fit on identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600.
Printed with Prusa MK4
PLA
3 to 4 perimeters
50% infill
Position of the seam: random
Please note: For a perfect fit, the 14mm hole must be brought to the exact size with a 14 H7 reamer!!
If anyone prints it and uses it, please let me know if it actually fits the other lathes mentioned.