Ultra light weight Y carriage for Ender 3 V3 SE KE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultra light Y-axis base for Ender 3 V3 SE KE EXPERIMENTAL
- Ocena
- 4,5 / 5
- Polubienia
- 83
- Pobrania
- 345
- Wydruki
- 2
- Wyświetlenia
- 4091
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Initially, the idea was to cut it out of a sheet of carbon using a CNC router; in principle, you can do it with a manual router using a copy cutter, and transfer the holes through a template...
The table also needs to be leveled with spacers, but even with pieces of paper, I don’t care at all. You can also try to increase the printing speed by reducing weight (the original one weighs about 450 grams)
Ultra light y axis base for Ender 3 V3 SE KE experimental version. Installed with original fasteners, the only thing is that you need a slightly longer bolt for the end switch!!! (this is very important, check if the bolt touches the end switch!) This is an addition to the carriages, together everything is very cool and quiet, and most importantly, you don’t need to buy anything!))
As I test, I will post new versions, subscribe to stay informed, there are also several mods for this series on my profile.
My MODS for Ender 3 V3 SE, KE