ALDI / BELAVI plant box stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stabilizer for the ALDI / BELAVI plant box set
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is quite a niche product to be honest, but i thought someone might also need it.
It is the first thing i created in CAD, so don't be to harsh ;)
I bought a plant box set from ALDI, but the three stabilizers were missing, so i made my own.
They are placed in the notches of the plant boxes and keep them from bulging outwards.
A really simple print using 2.12 meters of PLA filament.
Layer height: 0.2mm
Nozzle: 0.4mm
Nozzle temp: 210°C
Length: 16cm
Height: 1.4cm
The stabilizer is a tiny bit thicker then the notches in the plant box, this is to keep them in place and avoid them getting loose. You need to press firmly to get them in place, maybe use a hammer for the last few mm.