SecureIt Stock Base (Single)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better than factory slope, utilizing full front to rear textured volume and textured surface.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 651
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The factory stock bases came in pairs only and locked together. I used silicone anti-slip stick on pads (https://a.co/d/jhKbm7f) cut to size, tiny 1" x 0.25" strip in front and rear. I can then utilize this to better stagger my stocks, with some more forward at an angle closer to 90 degrees upright while others with lower centers of gravity can be angled further from perpendicular. This allowed me to better run stocks directly adjacent to one another, where mounted lights would otherwise prevent them from being so close. I also better matched the angle of tactical stocks so there is more contact area instead of a small patch, which allowed for wobble from the factory version.