Silicone Mold for 2.2 Tire foam inserts - 5.75" Tall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a mold to make your own silicone 2.2 tire inserts for 5.75" Tall tires.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1025
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mold to make your own silicone 2.2 tire inserts. I went through a few iterations to find what I think works pretty good. The rings I'm still unsure about. When I designed them I figured it might help with getting the mold apart and with cleaning but I don't think it really makes a difference. I'll probably try a version getting rid of the rings and just have a top and bottom. I'll update this post if it works better.
EDIT:
Just added a 2 piece version. Got rid of the rings and combined for just a top and bottom. Haven't made any inserts with them yet. I'm waiting on more silicone. Will update when I get a chance.
These inserts are on the heavy side compared to regular foam inserts. I found some flexible foam for molds that I'm planning on trying as well. If it works I'll add an update.
Materials
You'll need fourteen m3 bolts a minimum of 65mm long and fourteen m3 nuts.
I'm using these ones. They're 70mm long. It's just what I had on hand.
For the silicone it all depends on the weight of your rig. I started with a 15A silicone and it's pretty soft. for a light rig it will probably work pretty good for front tires but think the rear needs a firmer silicone. Maybe a 20A. I currently have 20A setting up. Once I get a chance to run them I'll update.
You'll need 150ml of silicone per insert.
This is the 15A Silicone I used. It was enough to do all 4 inserts.
https://www.amazon.com/dp/B0C6SZNQD9?ref=ppx_yo2ov_dt_b_product_details&th=1
Mixing cups for the silicone. Go with at least 200ml cups that way you won't spill when mixing. the mold will take just under 150ml to fill. If you're doing one insert at a time a 75ml mark on the cups is handy.
These are what I used. However. I wouldn't use the paddle mixers with a drill. It adds a lot of air to the silicone. I had better results mixing the silicone by hand. Unless you have a vacuum chamber and can degas the silicone before you inject it into the mold.
A large syringe. Get one that doesn't have the interchangeable tips. The ones that don't have interchangeable tips have a larger opening. I tried the interchangeable tips and it took a long time to transfer the silicone.
As mentioned above it does take some effort to get the mold apart after it sets up so I made some pry bars to help with the process and makes it a lot easier. You'll need to print 2 of them. One for each side.
Filament
I used regular PLA for everything. It's been worked fine so far.
Print all parts with a minimum of 4 vertical walls, 4 top layers and 4 bottom layers.
Infill
Use at least 30% Cubic or similar infill. There is a fair amount of pressure used to get the halves apart. I used these settings on my 2nd version and haven't had any issues with mold integrity.
I've also included the step file and a f3d file if anyone wants to change/improve on what I started. If you do please share with the rest of us!