Cinelog35 V2 Walksnail Moonlight Mount Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When ordering the analog version there is only one whole for the camera mount, which requires a new mount for the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When ordering the analog version there is only one whole for the camera mount, which requires a new mount for the Walksnail system. This version can be used for the Moonlight, but also any other Walksnail camera with 2 mounting wholes.
The Moonlight VTX is slightly bigger than an O3 unit the Cinelog35V2 was designed for. It works with the Moonlight kit, but the airflow is limited, therefore the 2 or 3mm spacer help a bit. Both work fine, but I would recommend the 3mm, which has just enough clearance.
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV05
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
100%
Filament: Geetech TPU
Black
Category: R/C Vehicles