Thumb Pro mount for the AOS5 EVO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount will allow you to attach a Runcam Thumb to your AOS5 Frame. If printed in anything else than TPU the two…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount will allow you to attach a Runcam Thumb to your AOS5 Frame. If printed in anything else than TPU the two screws will be enough. If TPU is used I recommend a cable tie in addition to the screws.
The attachment is a bit off center to allow the lens to move a bit closer to the center and the mount is high enough to allow the mounted XT60 socket to be in the front position. (depending on the angle you are looking for it might touch the battery's cable though.
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV05
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
100%
Filament: Extruder PETG, PLA, TPU, ASA
black
Notes:
Material doesnt really matter that much, but I prefer PETG or if a soft mount is needed TPU can be used too.
Category: R/C Vehicles