2" Netpot light covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light blockers / covers for 2" netpots. These will fit over most 2" netpots
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Very simple light blockers / covers for 2" net pots. The two halves are identical so just print the same model twice and you will have what you need for 1 net pot. Printing 16 our at once took around 2 hours and was a very simple print.
I wanted to block light from entering my net cups to avoid algea and was over using clay pebbles (hydroton) since they don't actually block all the light and tend to fall out and roll into the most hard-to-reach place in the room. These will fit over most 2" net pots with a brim of up to 63mm diameter. If yours are wider, you can simply place them on with the lip faced up instead of down.
I have included multiple center opening sizes: 15mm, 25mm, 35mm
If you would like to lift up your netpost a little bit to gain more airspace, check out my 2" netpot lifters / spacers