Ikea Tagarp Lamp Shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the shade of the Tagarp (old version) lamp from Ikea. The dimensions do not match the…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement for the shade of the Tagarp (old version) lamp from Ikea. The dimensions do not match the original due to my limited printer size, but is big enough to fulfill its purpose.
I would recommend using an LED lamp rather than a incandescent one to avoid high temperatures close to the filament.
Print Settings
Printer Brand:
Artillery
Printer:
Artillery Genius
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
No, used Vase mode
Filament: Das Filament PETG
White
Notes:
This was printed using Vase mode with 1.5mm minimum bottom shell thickness The 0.1 mm layer height is strongly recommended due to the strong overhangs.
Category: Replacement Parts