Emax 250 Nighthawk Pro landing gear 3mm (Flexible PLA only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remake from https://www.thingiverse.com/thing:808768 (3mm) but intended for flexible PLA. If this is printed with…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Remake from https://www.thingiverse.com/thing:808768 (3mm) but intended for flexible PLA. If this is printed with normal PLA, the legs of the drone need to be removed so the gear can be inserted from the side.
Difference: Bridged legs
Video: https://www.youtube.com/watch?v=QTHIsnq8u6M
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
Yes
Supports:
No
Notes:
cura.ini: layer_height = 0.1 wall_thickness = 0.8 retraction_enable = False solid_layer_thickness = 0.6 fill_density = 25 print_speed = 30 print_temperature = 235 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 print_temperature5 = 0 print_bed_temperature = 70 support = Everywhere platform_adhesion = Brim support_dual_extrusion = Both wipe_tower = False wipe_tower_volume = 15 ooze_shield = False filament_diameter = 2.85 filament_diameter2 = 0 filament_diameter3 = 0 filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 nozzle_size = 0.4 retraction_speed = 40.0 retraction_amount = 4.5 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All retraction_minimal_extrusion = 0.02 retraction_hop = 0.0 bottom_thickness = 0.2 layer0_width_factor = 100 object_sink = 0.0 overlap_dual = 0.15 travel_speed = 170.0 bottom_layer_speed = 20 infill_speed = 20 solidarea_speed = 15 inset0_speed = 30 insetx_speed = 25 cool_min_layer_time = 5 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 150.0 fan_full_height = 0.5 fan_speed = 100 fan_speed_max = 100 cool_min_feedrate = 10 cool_head_lift = False solid_top = True solid_bottom = True fill_overlap = 15 perimeter_before_infill = False support_type = Lines support_angle = 60 support_fill_rate = 15 support_xy_distance = 0.5 support_z_distance = 0.15 spiralize = False simple_mode = False brim_line_count = 20 raft_margin = 5.0 raft_line_spacing = 3.0 raft_base_thickness = 0.3 raft_base_linewidth = 1.0 raft_interface_thickness = 0.27 raft_interface_linewidth = 0.4 raft_airgap_all = 0.0 raft_airgap = 0.22 raft_surface_layers = 2 raft_surface_thickness = 0.27 raft_surface_linewidth = 0.4 fix_horrible_union_all_type_a = True fix_horrible_union_all_type_b = False fix_horrible_use_open_bits = False fix_horrible_extensive_stitching = False plugin_config = object_center_x = -1 object_center_y = -1
Category: R/C Vehicles
